Furuno FI-70, Руководство оператора

Страница: 60 / 98

4. SYSTEM MENU
4-16
4.13 How to Change the Language
To change the language, do the following:
1. Access the [System] menu using the proce-
dure outlined on page 4-1.
2. Press the software keys select [Language],
then press the function key.
3. Press the software keys to select the appro-
priate language, then press the
function key to apply the setting.
4. Press the Menu/Back key to close the
menu.
4.14 How to Change the Units of Measurement
All units of measurement display may be changed using the procedure below.
1. Access the [System] menu using the procedure outlined on page 4-1.
2. Press the
software keys select [Units], then
press the function key.
3. Select the appropriate unit to adjust, then
press the function key to display the
available options.
4. Adjust the units as required, then press the
function key.
5. Press the Menu/Back key twice to close the
menus.
The units and their available options are shown in the table below.
*: The FI-70 can not display the trip and odometer by the meter and yard. For example,
when [Distance] is set to [NM,yd], this equipment displays the trip and odometer
only by the nautical mile.
Unit Available options
[Depth] [ft], [m], [fm], [PB]
[Speed] [kn], [km/h], [MPH]
[Distance] [NM], [km], [SM], [NM,yd]*, [NM,m]*, [km,m]*, [SM,yd]*
[Wind Speed] [kn], [km/h], [MPH], [m/s]
[Temp.]
(Temperature) [°C], [°F]
[Fluid] [l], [gal]
[Atmos. Press.]
(Atmospheric Pressure) [hPa], [mbar]
[Engine Press.]
(Engine Pressure) [kPa], [bar], [psi]
[ALT & Heave] [ft], [m]
[3-Axis Speed] [kn], [km/h], [MPH], [m/s]
Restore Factory Default
System
Units
Language:
Francais
Espanol
Deutsch
English
Ent
Units
Depth:
Speed:
Distance:
Wind Speed:
ft
kn
NM
kn
Ent