Furuno FELCOM250, Руководство по установке

Страница: 42 / 69

3. SETTING AFTER INSTALLATION
3-8
3.5 Serial Port Setting
Set for the equipment that is connected to the RS-232C port.
1. Click [Serial port] in the Basic settings sub menu.
2. Select a baud rate from the [Baud rate] drop-down list. The selections are 9600,
19200, 38400, 57600 and 115200 bps.
3. Set a parity bit in the [Parity] box. The selections are None, Even and Odd.
4. Select the [Flow control] among Hardware, Software and None.
5. Click the [Apply] button to complete the setting.
3.6 Satellite Setting
The three satellites are named APAC (Asia-pacific), EMEA (Europe-Middle east-Afri-
ca) and AMER (America). To change satellite name, do as follows.
1. Click [Satellite] in the Basic settings sub menu.
2. Put the cursor in the Name box and enter the name of the satellite (max. 10 char-
acters).
3. Click the [Apply] button to complete the setting.
The meaning of the table items is as follows.
• ID: Identification of the satellite
• Position: Position of the geostationary satellite (longitude)
• Primary: Frequency of the first global channel of the satellite
• Alternate: Frequency of the second global channel of the satellite