Furuno FCV-288 Скачать руководство пользователя страница 42

Страница: 42 / 56

4. INSTALLATION

4.10

NMEA Port Setting

If a GPS navigator and/or other sensor are
connected to the NMEA port, set up the port
as follows:

1. Press the

MENU

key.

2. Press to select [System] and [NMEA] and

then press the

ENTER

key.

NMEA setting menu

3. Press

to select the item to set and then

press the

ENTER

key.

4. Press

to select an appropriate

one and then press the

ENTER

key.

Description for each item of the NMEA
menu

NMEA0183:

Choose NMEA0183 version of

navigation equipment connected to the
NMEA port, among Ver. 1.5, Ver. 2.0 or Ver.
3.0.

TLL Output:

Output the position selected by

the

MARK

key to the plotter connected.

•  [Off]: Does not output latitude/longitude.
•  [TLL]: Outputs latitude/longitude.
•  [FURUNO-TLL]: Outputs latitude/longitude,

depth and water temperature. This requires
FURUNO-TLL enabled device.

Port Monitor:

Port Monitor provides informa-

tion for the data sentences input to the NMEA
port. Press the

ENTER

key to display the lat-

est data sentence information. To terminate
the port monitor, press

MENU

key.

Содержание FCV-288
























































Результаты поиска

Содержание FCV-288

Отзывы:

Furuno FCV-288, Руководство оператора, Страница: 42 / 56

Результаты поиска

Содержание FCV-288

Отзывы: