Furuno FAR-2137S, Руководство по установке

Страница: 73 / 130

5-1
5. INPUT/OUTPUT DATA
Input and output data are shown in the table below.
Note: This radar accepts position data fixed by WGS-84 geodetic datum. Set the datum to
WGS-84 on the EPFS (GPS, etc.) connected to this radar. If other type of datum is
input, the error message "DATUM" appears and the AIS feature is inoperative.
Input
Data Specifications Contents Remarks
synchro or step GC-10 required
AD-10 format External AD-100
Heading signal
IEC 61162-2
AD-10 and
IEC 61162 are
switched by menu
setting.
Speed signal IEC 61162-1
Navaid data IEC 61162-1 Position, course,
speed, LORAN-C
TD, waypoint, route,
time, wind data,
current data, depth,
temperature, roll,
pitch, ROT
External radar
signal Heading, Bearing,
Trigger, Video No STC control Operate as remote
display
Alarm ACK input Contact closure Input from alarm
system
Track Control unit RS-422 Option
Output
Radar system data RS-232C RSD, OSD, TLL,
AAM For PC plotter
ARPA data IEC 61162-1 TTM For ECDIS
Remote display
signal HD, BP Trigger,
Video 2 ports
External LCD
monitor signal DVI Same as main
display unit 2 systems in total
External CRT
monitor signal R, G, B, H, V Same as main
display unit Option
Alarm signal Contact closure Output to alarm
system by using
photo-relay 4 systems, Output
contents are
selected by menu.