manualshive.com logo in svg

Furuno DRS6A X-Class, Руководство по установке

Поделиться
Скачать
Furuno DRS6A X-Class Скачать руководство пользователя страница 44

1. INSTALLATION AND WIRING

3. Apply silicone rubber to the thread of the stud bolts (M12 70, 4 pcs).

Note:

Apply silicone rubber to the part of thte bolt threads that are inside the bolt

hole (see the figure at step 4).

4. Insert four stud bolts into the threaded holes in the antenna unit.

The stud bolts must make contact with the bottom of the threaded holes.

Note:

Do NOT cover the vent hole at the bottom of the unit.

5. Hoist the antenna unit to the installation location, using two belt slings.

Note:

When you hoist the antenna unit. keep in mind the following points:

• When you hoist the antenna unit, set two belt slings to the radiator bracket. Do

not set the belt slings to the radiator, the radiator may get damaged.

Stud bolt

Silicone rubber

Detailed view

Vent hole:
Do NOT cover this hole.

Silicone 
rubber

Stud bolt

Corrosion-proof 
rubber pad

Do not fasten stud bolts tightly after 
the bolts contact with the bottom of 
the threaded holes. 

If the bolts are fastened excessively, the 
chassis bottom may be damaged which 
can result in malfunction.
The projected bolt length after the bolts 
contact with the bottom of the threaded 
holes is approx. 46 mm. This data is for 
reference purpose only.

NOTICE

Belt sling (2 pcs)

OK

: Belt slings are set to the radiator bracket. 

WRONG

: Belt slings are set to the radiator. 

Содержание DRS6A X-Class










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды