manualshive.com logo in svg

Furuno DRS6A X-Class, Руководство по установке

Поделиться
Скачать
Furuno DRS6A X-Class Скачать руководство пользователя страница 22

2. INITIAL SETUP

2.2

Initial Setup for TZTL12F/TZTL15F

1. Tap the [Home] icon to show the home screen and display mode settings.
2. Tap [Radar] from the [Settings] menu.
3. Tap [Radar Source], then select the appropriate antenna unit.

Note: 

If the antenna unit is connected but does not appear in the [Radar Source]

list, close the list and open it again. The name of the antenna unit should appear
with a check mark, as in the example below.

4. Drag the [Radar] menu display the menu item [Radar Initial Setup], then tap

[Radar Initial Setup].

5. Referring to the tables below, set up the radar.

[Radar] menu - [Radar Initial Setup]

[Radar] menu - [Antenna Position]

Menu item

Description

[Antenna Rotation]

Select the antenna rotation speed.

[Antenna Heading Align]

See "How to align the antenna heading" on page 18.

[Main Bang Suppression]

If main bang appears at the screen center, slide the circle 
icon so that the main bang disappears, while watching the 
radar echo at the left-hand side of the display.

[Enable Sector Blanking]

Up to two sectors may be selected for blanking (no trans-
mission). Select [ON] to enable this feature. Set the start 
and end angles (0° to 359°).

[Enable Sector 2 Blanking]

Menu item

Description

[Longitudinal (from bow)]

Referring to the figure on the right, enter the ra-
dar antenna positioning bow-stern (Longitudi-
nal) and port-starboard (Lateral) position from 
the origin.

[Lateral (-Port)]

[Antenna Height]

Select the height of the antenna above the waterline.

[Auto Tuning]

Enable/disable auto tuning for the connected radar.

[Tuning Source]

Select the range to tune.

[Manual Tuning]

Manually tune the radar. Not available when [Auto Tuning] 
is enabled.

[Radar Monitoring]

Display various information regarding the connected ra-
dar.

[Radar Optimization]

Automatically adjust magnetron output and tuning for the 
connected radar. Do not change these settings.

[ARPA Advanced Settings] Do not change these settings.
[Set Hardware To Factory 
Default]

Resets the radar selected at [Radar Source] to factory de-
fault.

[Reset Default Settings]

Resets [Radar] menu settings to default.

RDxxxxxx - DRS6A X-Class

Origin

Origin

Содержание DRS6A X-Class










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды