Furuno CI-35, Руководство по установке

Страница: 65 / 99

4-11
Factory Setting Function
PCB
Symbol
No.
No. ON OFF
1
○
CIF data output
OFF: Data created by CI-35/35H only
ON: CI-35/35H data combined with incoming CIF data
(through-line)
2
○
Analog indicator
OFF: for 30 kt range scale indicator
ON: For 40 kt range scale indicator
3
○
Interference rejection by KP1
OFF: OFF ON: ON
4
○
Interference rejection by KP2
OFF: ON: ON
5
○
Synchronous transmission with KP1 input
(available with #3 ON)
OFF: OFF ON: ON
6
○
Inclinometer ON/OFF
OFF: OFF ON: ON
7
○
Bearing sensor
OFF: Yes ON: No (always HU)
JIFA
66P3800
S3.
8
○
CH-35: No use CH-35H: NMEA port ON/OFF:
OFF; OFF, ON; NMEA 0183 ON
1
○
2
○
Selection of bottom tracking reference beam
1 OFF ON OFF ON
2 OFF OFF ON ON
Beam
Beam 1 Beam 2 Beam 3 All
3
○
Transmission output
OFF: Level 2 (normal) ON: Level 1 (reduced)
4
○
TX repetition rate & pulse width in water tracking mode
OFF: Fast rate/narrow pulse (Standard)
ON: Slow rate/wide pulse (Deep)
5
○
Automatic compensation of sound velocity by thermal
sensor
OFF: Yes ON: No
6
○
Smoothing response for current indication
OFF: Slow (standard) ON: Fast (less stable)
7
○
Smoothing response for current indication in nav-aided
mode (*Effective on CI-35/35H only)
OFF: Fast (standard) ON: Slow (high stability)
JCP
66P3205
S5
8
○
Validity of GPS data when ship’s speed is almost 0 kt.
OFF: Valid ON: Invalid (reject)*
www.reelschematic.com
www.reelschematic.com