Furuno CI-35, Руководство по установке

Страница: 28 / 99

1-6
1.3 Alteration of Power Supply Voltage
1ø, 50/60 Hz AC power is supplied to the transceiver unit. The transformer tap is set at
the factory according to customer’s order. If necessary, change jumper wires at TB5 of
the Transceiver Unit according to the input voltage.
JTRA
PWR SUPPLY
Note: Confirm that the jumper settings in the transceiver unit are set
according to ship's mains before turning power on.
JTX
JLG JFT
JCP
JIFA
Power Block
Fuse for input
voltage of
transmitter
Maintenance
Switch
R31
R32
(See page 4-18.)
For
Interference
Rejection.
JCN
Service Outlet
(Input voltage present)
Power Switch
Power Lamp
TB5
AC100V AC110V AC120V AC200V AC220V AC240V
1
2
3
4
5
6
7
8
9
10
11
Example: For 220 VAC input, put jumpers between
terminals 1 and 3, and 5 and 7.
CAUTION
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
The voltage rating appears on the label
at the rear of the equipment.
Fig. 1-4 Jumper Connections for Mains Voltages
www.reelschematic.com
www.reelschematic.com