Furuno 3D Sonar Visualizer F3D-S, Руководство по установке

Страница: 6 / 20

1. PREPARATION
2
1.2 Requirements for FSV-25
The following updates of programs and printed circuit boards are required to use the
F3D-S. If your FSV-25 does not meet the following requirements, contact your dealer.
Program version requirements for FSV-25
1.3 How to Connect the LAN Cable
Note: Before connecting the cable, post a notice indicating that the power should not
be applied while doing this procedure.
1. Connect the LAN cable at the back of the processor unit, to Port 3 or Port 4.
Note: Do not connect the cable to Port 1 or Port 2, because the system will auto-
matically shut down after boot up.
2. Use a cable tie to fasten the cable to the cable clamp on the processor unit.
3. Connect the other end of the cable to the LAN port on the PC.
Unit Name of operation test Program version
Processor Unit FSV-2503 FSV-2503 105-0896-02.07 or higher
105-0897-02.07 or higher
105-0926-01.01 or higher
105-0927-01.01 or higher
Transceiver Unit FSV-251 TRCPU 105-0894-02.04 or higher
TRX 105-0890-01.08 or higher
LAN cable
To PC
Cable gland
Port number
1 2 3 4