background image

INTRODUCTION 

Thank you for purchasing the GE-PON ONU Equipment made by Furukawa Electric Co., Ltd. 

This  instruction  manual  describes  the  basic  operations  of  the  ONU  Equipment.  Read  the  instruction 

manual carefully before operating the equipment for proper use of the unit. Store this manual for later 

reference as needed. 

 

 

 

This instruction manual is subject to change without notice. 

Furukawa Electric Co., Ltd. will not bear any responsibility for operation of the equipment. 

No part of this manual may be copied or transcribed without permission. 

 
 
 
 
 
 
 

This  product  is  information  technology  equipment  that  falls  within  the  category  of  Class  B 

(optical  termination  equipment)  based  on  the  standards  of  the  Voluntary  Control  Council  for 

Interference by Information Technology Equipment (VCCI). This equipment assumes the use in 

the home environment and may cause interference with nearby radios or TVs. Use the equipment 

properly as described in the instruction manual. 

 
 
 
 
 

This  equipment  and  instruction  manual  contains  technologies  related  to  strategic  products

specified in the Foreign Exchange and Trade Control Law. Exportation of this equipment and/or 

instruction manual requires approval in conformity to this law. Destroy the instruction manual 

completely when disposing of it. 

 
 
 
 
 
 

-1- 

330-B1272-AH01 

Содержание FITELwave AG20E (L)











Отзывы: