7
In addition, any roof penetration required to mount the module must be properly
sealed to prevent leaks.
–
Observe the linear thermal expansion of the module frames [the recommended
minimum distance between two modules is 7/16" (10mm)].
–
Always keep the back-sheet of the panel free from foreign objects or structural
elements, which could come into contact with the panel, especially when the
panel is under mechanical load.
–
Ensure panels are not subjected to wind or snow loads exceeding the maximum
permissible loads (176lbs/80kg), and are not subject to excessive forces due to
the thermal expansion of the support structures.
Secure the Solar Panel to the RV Roof
1. Mount the solar panel through the z-brackets (sold separately) such that at least
2 of the mounting feet have screws penetrating the metal or wooden framing
trusses. For fixed mounting, the points should be installed with M6 bolts in the
frame on the long side of the panel, as shown below:
ELECTRICAL CONNECTION
To power the Solar Photovoltaic System properly, the following Furrion components
are also required except the solar panel. Please contact Furrion authorized dealer to
purchase the product(s) as required and refer to the individual instruction manual that
comes with the product to set up the system.
Furrion Model#
Description
C-FSFP16MW-A02
Z-Bracket
FSCC30PW-BL/FSCC60PW-BL
MPPT Solar Charge Controller
C-FSCC60PW-A01/C-FSCC60PW-A02
Temperature Sensor
FSEB30JWL-BL
Rooftop Solar Electrical Box
FBF12A100E
LiFePo4 Battery Pack
