4
English
Grounding Instructions
This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock
by providing an escape wire for the electric current. This
appliance is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
WARNING
ELECTRIC SHOCK HAZARD
●
Plug into a grounded 3-prong outlet.
●
Do not remove grounding prong.
●
Do not use an adapter.
●
Failure to follow these instructions can result in
fire, electric shock or even death.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too
short, have a qualified electrician install an outlet near the
appliance.
CAUTION
1. Take care when using cleaning agents or detergents.
2. Avoid using food products that produce flames under
the Range Hood.
3. To avoid motor bearing damage and noisy and/or
unbalanced impellers, keep drywall spray, construction
dust, etc. off power unit.
4. Your hood motor has a thermal overload which
will automatically shut off the motor if it becomes
overheated. The motor will restart when it cools down.
If the motor continues to shut off and restart, have the
hood serviced.
5. Please read specification label on product for further
information and requirements.
6. Use only the power cord that is already assembled to
the range hood.
Save these instructions for future reference!
Installation
What’s in the Box
Make sure all the following items are included in the
packaging. If any items are damaged or missing, contact your
dealer.
Part
Description
Quantity
24" Under Cabinet Hood
1
Damper
1
Drywall Anchors
6
ST4x30mm
6
ST4x6mm
4
User Manual
1
Warranty Manual
1
IMPORTANT:
Observe all governing codes and ordinates.
It is the installer’s responsibility to comply with installation
clearances specified on the model/serial/rating plate. The
model/serial/rating plate is located inside the range hood;
Range hood location should be away from strong draft areas,
such as windows, doors, and strong heating vents.
Tools Required (Not Provided)
Part
Description
Electric drill
Bit Size: 5/16" (8mm)
Safety goggles
Gloves
Adjustable wrench
Tape measure
Pencil
Phillips screwdriver
Flat Blade
Cutting knife
Torpedo Level
Round Ductwork
31/4" x 10" (83mm x 254mm) transform to
round vent
Ductwork of rectangular damper 31/4" x 10"
(83mm x 254mm) transform to round vent
WARNING
Installation of this appliance must be made in accordance
with the written instructions provided in this manual. No
agent, representative or employee of Furrion or other
persons has the authority to change, modify or waive any
provision of the instructions contained in this manual.
