7
4. Separate the metal rod, the metal holder and the charcoal
filter from the cover. (Fig. 16)
Metal Holder
Metal Rod
Charcoal Filter
Fig. 16
5. Dip the metal holder into mild soapy water and wash by
hand. (Do not use the dishwasher to wash.)
6. Allow the metal holder to dry completely before replacing.
Charcoal Filter
This appliance is designed with a charcoal filter equipped to
absorb smells and unwanted odors.
The charcoal filter cannot be cleaned, we recommend they
should be replaced approximately every three months or
more often if the range hood is used for more than three
hours per day. To replace the charcoal filter:
1. Repeat steps 1 to 3 in section ‘Metal Holder’ to remove the
metal rods and metal holder first.
2. Remove the saturated charcoal filter and replace with a
new one. (Fig. 17)
Charcoal Filter
Fig. 17
3. The replacement charcoal filter can be obtained from your
local service center.
4. Repeat steps 4~1 in ‘Metal Holder’ to replace the filter
panel. See figure 15 for the replacement process of the
filter and metal holder.
Specifications
10” (252mm)
4 ” (119.3mm)
23 ” (598mm)
4 ” (119.3mm)
3 ” (82mm)
1”
(25
m
m
)
17
11⁄16
” (449.3mm)
Specifications
Connection Voltage
12 VDC
Power Consumption
1.1 A
Lighting Power Consumption
0.95 W
Overall Dimension
(W x H x D)
231/2” x 1711/16” x 43/4”
(598 x 449.3 x 119.3 mm)
Vent Collar Dimensions
(W x H x D)
10” x 1” x 31/4”
(252 x 25 x 82 mm)
REV DATE: 10.14.2022 | CCD-0005584
