5
4. Mark the centerline of range hood on the wall. (Fig 3)
NOTE:
− If using a Furrion range (Model No.: F1S17****/
F1S21****) or a Furrion cooktop (Model No.:
FGHQCLDA), the following minimum vertical distance
and cabinet depth should apply. (See Fig. 3 and Fig. 4).
19½”
4¾”
239⁄16”
Center of
Range Hood
Range Hood
Outline
10⅞”
3¾”
⅝”
16
¹¹⁄16
”
Installation Height
Cabinet Depth
Fig. 3
19
¹⁄2”
4
³⁄4”
23
⁹⁄16”
Center of
Range Hood
Range Hood
Outline
10
⁷⁄8”
3
³⁄4”
⁵⁄8”
Min. 13” to
Max
.
16
¹¹⁄16”
16
¹¹⁄16”
Min. 13” to
Max
.
14
³⁄8”
16
¹¹⁄16”
Fig. 4
− For non Furrion branded cooktops and range ovens,
refer to Fig. 5 for the installation requirements. Ensure
that the installation is performed by a qualified
technician and is in compliance with NFPA 1192 section
5.6.6.5.
19½”
4¾”
239⁄16”
Center of
Range Hood
Range Hood
Outline
10⅞”
3¾”
⅝”
16
¹¹⁄16
”
Installation Height
Cabinet Depth
Fig. 5
− For cabinet depths of 13" to 143/8": installation height
minimum is 191/2".
− For cabinet depths of 145/16" to 1611/16": installation
height minimum is 24".
− Hood shall be not less than the width of the range and
shall be centered over the range and cover the entire
bottom of the material to be protected.
5. Mark and cutout a through-hole on the wall according to
the dimensions outlined in Fig. 3.
6. Connect the vent hood white wire negative (-) to the
incoming power supply negative (-) wire and the vent
hood black wire positive (+) to the incoming power supply
positive (+) wire. (Fig 6)
NOTE:
Make all electrical supply connections in
accordance with local and/or applicable codes.
Fig. 6
7. Insert vent collar at back of the range hood into the cutout
area and fix the range hood onto the top cabinet with the
four screws provided. (Fig. 7 and Fig. 8)
NOTE:
DO NOT over tighten the screws.
Fig. 7
Fig. 8
8. Verify that the blower housing and ductwork are free of
debris and fan blades spin freely.
9. Replace the grill cover to the range hood and press the
release tabs until you hear a click. (Fig. 9) The grill cover is
securely attached to the range hood. (Fig. 10)
Fig. 9
Fig. 10
REV DATE: 10.14.2022 | CCD-0005584
