5
Safety Warnings
24. Do not allow the product to output
distorted sound for an extended period of
time. It may cause speaker overheating
and fire.
25. This reminder is provided to call the
cable TV system installer’s attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding
system of the building, as close to the
point of cable entry as practical.
26. The socket-outlet must be installed near
the unit and easily accessible.
27. The mains plug is used as the disconnect
and shall remain readily operable.
CONDENSATION
Moisture will form in the operating section
of the unit if the unit is brought from cool
surroundings into a warm room or if the
temperature of the room rises suddenly.
When this happens, unit’s performance will
be impaired. To prevent this, let the unit
stand in its new surroundings for about an
hour before switching it on, or make sure that
the room temperature rises gradually.
Condensation may also form during the
summer if the unit is exposed to the breeze
from an air conditioner. In such cases,
change the location of the unit.
HOW TO HANDLE THE LCD PANEL
●
Do not press hard or jolt the LCD panel. It
may cause the LCD panel glass to break
and injury may occur.
●
If the LCD panel is broken, make
absolutely sure that you do not touch the
liquid in the panel. This may cause skin
inflammation.
If the liquid gets in your mouth,
immediately gargle and consult with your
doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with
your doctor after rinsing for at least 15
minutes or longer in clean water.
Possible Adverse Effects on LCD Panel:
If a
fixed (non-moving) pattern remains on the
LCD Panel for long periods of time, the image
can become permanently engrained in the
LCD Panel and cause subtle but permanent
ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave
your LCD Panel on for long periods of time
while it is displaying the following formats or
images:
●
Fixed Images, such as stock tickers, video
game patterns, TV station logos, and
websites.
●
Special Formats that do not use the entire
screen. For example, viewing letterbox
style (16:9) media on a normal (4:3)
display (black bars at top and bottom of
screen); or viewing normal style (4:3)
media on a wide screen (16:9) display
(black bars on left and right sides of
screen).
The following symptoms are not signs
of malfunction but technical limitation.
Therefore we disclaim any responsibility for
these symptoms.
●
LCD Panels are manufactured using
an extremely high level of precision
technology, however sometimes parts
of the screen may be missing picture
elements or have luminous spots. This is
not a sign of a malfunction.
●
Do not install the LCD Panel near
electronic equipment that produces
electromagnetic waves. Some equipment
placed too near this unit may cause
interference.
●
Effect on infrared devices – There may be
interference while using infrared devices
such as infrared cordless headphones.
