Furrion FDHS32M2A, Инструкция по эксплуатации

Страница: 15 / 32

14
Getting Started
The Setup Wizard window appears the first
time you turned on the TV. It will assist you
to configure the TV and scan for available
channels.
IMPORTANT: Make sure the antenna or cable
TV system connection is made.
1. Press POWER button on the TV control
panel or button on the remote control
to switch on the TV. The power indicator
will change to green. The Setup Wizard
window appears on the screen.
NOTE: It may take a few seconds before
the Setup Wizard window appears on the
screen.
2. Use or key to highlight TV Location ,
then press
or
to select Home Mode or
Store Mode .
NOTE: When you select Store Mode it will
remind you Store Mode consumes more
energy. Select Yes to enter or No to cancel.
Press or to highlight Go to next step ,
press OK or to go to the next step.
You have selected [store].
This mode consumes more energy.
Are you sure?
Yes No
Setup Wizard
Go to next step
TV Location Home Mode
Select
Move
Exit MENU
Set the TV Mode to Store for retail display
use. Set the TV Mode to Home for home use.
In this mode the TV will remember your
customized settings.
3. Use or key to highlight Menu
Language , then press
or
to select the
desired language.
Press or to highlight Go to next step ,
press OK or to go to the next step.
Setup Wizard
Go to next step
Menu Language English
Select Move Return MENU
Please select your preferred language
4. Use or key to highlight Time Zone , then
press
or
to select desired time zone.
Use or key to highlight Daylight
Saving Time , then press
or
to select
On or Off .
Use or key to highlight Time Format , then
press
or
to select 12-hour or 24-hour .
Press or to highlight Go to next step ,
press OK or to go to the next step.
Setup Wizard
Daylight Saving Time Off
Time Format 12-hour
Go to next step
Time Zone Pacific
Select
Move
Return
MENU
Select the time zone & Daylight saving time
5. Use or key to highlight Air/Cable ,
then press
or
to select Air or Cable
base on your connection.
Press or to highlight Go to next step ,
press OK or to start the auto scan.
Setup Wizard
Go to next step
Air/Cable Air
Select the antenna type then auto scan
Select Move Return MENU
The Setup Wizard will scan for available
channels automatically. The scanning may
take some time.