6
Safety Warnings
English
immediately turn off and unplug the power
and contact the manufacturer.
27. Do not mount this product near a motor or
transformer where strong magnetism is
generated.
28. Do not allow the product to output
distorted sound for extended periods of
time. This may cause speaker overheating
and fire.
29. The socket-outlet must be installed near
the unit and easily accessible.
30. The mains plug is used as the disconnect
and shall remain readily operable.
31. Batteries (battery pack or installed
batteries) should not be exposed to
excessive heat such as direct sunlight, fire
or other heat sources.
CONDENSATION
Moisture will form in the operating section
of the unit if the unit is brought from cool
surroundings into a warm room or if the
temperature of the room rises suddenly.
When this happens the unit’s performance
will be impaired. To prevent this, let the unit
stand in its new surroundings for about an
hour before switching on, or make sure the
room temperature rises gradually.
Condensation may also form during the
summer if the unit is exposed to the breeze
from an air conditioner. In such cases, change
the location of the unit.
HOW TO HANDLE THE LCD PANEL
●
Do not press hard or jolt the LCD panel. It
may cause the LCD panel glass to break
and injury may occur.
●
If the LCD panel is broken, make
absolutely sure you do not touch the
liquid in the panel. This may cause skin
inflammation.
●
If the liquid gets in your mouth,
immediately rinse and consult with your
doctor. Also, if the liquid gets in your eyes
or touches your skin, consult your doctor
after rinsing for at least 15 minutes in
clean water.
Possible Adverse Effects on LCD Panel:
If
a fixed (non-moving) pattern remains on the
LCD panel for long periods of time, the image
can become permanently engrained and
cause subtle but permanent ghost images.
This type of damage is NOT COVERED BY
YOUR WARRANTY. Never leave your LCD
panel on for long periods of time while it is
displaying the following formats or images:
●
Fixed images, such as stock tickers, video
game patterns, TV station logos and
websites.
●
Special formats that do not use the entire
screen. For example, viewing letterbox
style (16:9) media on a normal (4:3)
display (black bars at top and bottom
of screen); or viewing normal style (4:3)
media on a wide screen (16:9) display
(black bars on left and right sides of
screen).
The following symptoms are not signs
of malfunction but technical limitation.
Therefore we disclaim any responsibility for
these symptoms.
●
LCD panels are manufactured using
an extremely high level of precision
technology, however sometimes parts
of the screen may be missing picture
elements or have luminous spots. This is
not a sign of a malfunction.
●
Do not install the LCD panel near
electronic equipment that produces
electromagnetic waves. Some equipment
placed too close to LCD may cause
interference.
●
Effect on infrared devices – there may be
interference while using infrared devices
such as infrared cordless headphones.
POWER SOURCE
NOTE:
Please make sure to insert the cord
securely at both the LED TV and the wall
outlet.
