background image

If there is any abnormal appearance while you are using the equipment, 

turn off the power immediately.    Do not use until safety is assured. 

3.2 General operation 

A. Turn on the power source and the green power indicator light should 

come on. Select the desired power level and proceed to cook. 

B.  According  to  your  need  to  choose  the  suitable  temperature.  The 

temperature range can be adjusted from 50~300

 

四、

  Installation 

a.  Put  the  stove  on  level  ground  and  ensure  a  clearance  of  at  least 

10cm  from  both  right  and  left  side,  and  at  least  20cm  from 

behind. 

b.  The  working  voltage  must  match  the  one  on  the  specification 

plate. 

c.  Install  the  allowable  power  source;  fuse  plug  and  grounding 

protection to the equipment. Do not put anything in front of the 

power switch. 

d.  The  power  connection  is  under  the  stove  in  the  rear  corner  and 

connects to ground for safety. 

e.  The  ground  wire  (yellow  and  green  wire)  and  power  source  wire 

are  in  the  same  wiring  harness.  Connect  the  ground  wire  by 

suitable copper bolt if the power point doesn’t have one.

 

      Attention 

Содержание FSEMM-0304

Страница 1: ...Manual FSEMM 0304 Shinelong International Co Ltd Web http www furnotel cn E mail info furnotel cn Fax 86 20 34709972 TEL 86 20 34709971 Address 301 Building 1 Tian An Hi tech Ecological Park Panyu Avenue Panyu Guangzhou China ...

Страница 2: ...nd enjoyment from cooking The FSEMM 0304 is our latest generation kitchen equipment The body is made from Japanese stainless steel and the smooth appearance is based on European styling They are fully featured easily to operate energy saving and are designed for environmental protection 一 Component Diagram 二 Parameters Name Cone baker Model FSEMM 0304 Size mm 320 380 266 Power 230V 50HZ Voltage 2 ...

Страница 3: ...ut the stove on level ground and ensure a clearance of at least 10cm from both right and left side and at least 20cm from behind b The working voltage must match the one on the specification plate c Install the allowable power source fuse plug and grounding protection to the equipment Do not put anything in front of the power switch d The power connection is under the stove in the rear corner and ...

Страница 4: ...er light Green is not lit The power fuse is burned out Thepower wire is improperlyconnected The light has burned out 1 Replace with a suitable fuse 2 Tighten the power wire connection 3 Replace the light 2 Power light Yellow is not lit The light is not available The circuit is not connected Change the power light Make sure the circuit is connected 3 The heater is not available The heater is burned...

Отзывы: