Page 3/4
ITEM NO: I240-404-RIV King Sleigh HB
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
I240-406-RIV King Rails
I240-410-RIV Cal King Rails
The outside holes match to 6/6 bed rails,
the inside holes match to 6/0 bed rails.
Headboard
Slat bearer
Side Rail
F
G H
I
J
05-31-2017
Wood Screws (K)
I240-407-RIV King FB
STEP 5: Screw the bolts(F) into HB & FB. Align the bolts with the holes in the end of side rails and
attach the side rails to HB & FB using half moon washers(G), lock washers(H) and nuts (I).Then use
a hex wrench to tighten all the nuts.
Make sure the slat bearer is
in the LOWER position.
This End Up
Slat
Support Leg
Leveler
STEP 6: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when necessary.
STEP 7: Arrange the slats on the slat bearers
equally and attach to the slat bearers with
wood screws (K).
STEP 8: For Cal King bed, insert wood caps(L) into the holes on
headboard and footboard. For regular King bed, skip this step.
Wood Cap
Leg
