CUBO CUB-CU412-FP
6
For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858
STEP SEVEN: Attach the FEET
•
The unit is pictured upside down. Please ensure the surface is clear of anything that may damage the TOP
before turning over.
•
Screw the
H37 Feet
to the BASE as shown below.
The holes for the feet are not pre-drilled
–
the screws will
be sharp enough to penetrate the wood.
NOTE: These feet are optional, to make cleaning and shifting of the unit easier, and can be left off if preferred.
However, we cannot cover damage caused to the base of the Shelving Unit if the feet are left off.
STEP EIGHT: Attach Back Panel
•
Your CUBO unit has one BACK PANEL that can be added for extra stability. This can be placed at the back of
either of the cubes on your Shelving unit. Once you have decided in which Cube to place the Back Panel,
screw the H34 RAFIX BOLTS into the four holes in the Cube as shown below.
•
Fit the Back Panel as shown below. The Rafix Bolts will fit into the RAFIX FITTINGS installed in the Back Panel.
•
Tighten the screws on the backs of the RAFFIX FITTINGS.
H34 Rafix Bolts
Содержание CUBO CUB-CU412-FP
Страница 1: ...Job No...
