Furniture Tree CUBO CUB-CU412-FP, Руководство по сборке

Страница: 3 / 7

CUBO CUB-CU412-FP 3
For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858
STEP ONE: Install Hardware in TOP and BASE
•
Lay the TOP and the BASE on a clean clear surface with the holes facing UPWARDS.
•
Install eight H1 CONNECTING BOLTS in the holes in the TOP and the BASE as shown below. These two parts
are identical, so you don’t need to worry about mixing them up.
……………….
STEP TWO: Install Hardware in the ENDS
•
Take the ENDS and lay them with the holes facing UPWARDS.
•
Install four H2 CAMS in each END. Ensure that the arrow on the top of the CAM points to the edge of the
END nearest it.
•
Install two H1 CONNECTING BOLTS in each END as shown below:
H1 Connecting Bolts
H2 Cams
H2 Cams