I. Align the front right leg (#3R) and left leg (#3L) to the seat (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then
the flat washer (#E) onto the SAME bolt (#B), in that order. Insert the bolt assemblies through
the pre-drilled holes in the corners of the seat (#2) and secure those bolts using the Allen
wrench (#F).
I. Attach the front leg support and R&L supports in the designated
slots along the legs.
II. Insert the wood screw (#G) at a diagonal and secure using a Phillips
screwdriver. Tighten screws until properly secure.
ASSEMBLY IS COMPLETED
