I. Align the seat (#2) with the pre-drilled holes of the backrest with legs (#1).
II. Prepare 2 bolt assemblies by inserting FIRST the lock washer (#D) onto the
bolt (#C) and then the flat washer (#E) onto that SAME bolt (#C), in that order.
Insert the bolt assemblies through the pre-drilled holes in the center of the seat
(#2). Secure using the Allen wrench (#F).
Prepare 4 bolt assemblies by FIRST
inserting the lock washer (#D) onto the
bolt (#A) then the flat washer (#E) onto
that SAME bolt (#A), in that order. Insert
into the back corners of the seat (#2)
and secure using the Allen wrench (#F).
Place the backrest with legs
on a protected surface
Note: Right and left are determined
by facing the FRONT of the chair
in its upright position.
