Furniture of America Francesca CM7911, Руководство по сборке

Страница: 6 / 7

I. The two mirror support
brackets (#3) are already
attached behind the dresser.
Position the mirror support
brackets (#3) vertically to
align with the pre-drilled hole
of the dresser (#1) AND the
mirror (#2).
II. Prepare 6 bolt assemblies by
inserting FIRST the lock
washer (#E) onto the bolt
(#A) and then the flat washer
(#D) onto the SAME bolt
(#A), in that order.
III. Insert those bolt assemblies
onto the mirror support
brackets (#3) and secure
those bolts using an Allen
wrench (#G) to lock them in
with the dresser (#1) AND the
mirror (#2).
IV. Tighten all bolts, including
those that were already
attached from the factory.
Page 6 of 7
Turn right (clockwise) to tighten
I. Align the legs (#5) with the pre-drilled holes of the headboard (#4).
II. Prepare 6 bolt assemblies by inserting FIRST the lock washer (#E) onto the
bolt (#C) and then the flat washer (#D) onto the SAME bolt (#C), in that
order.
III. Insert the bolt assemblies through the back of the legs (#5) and secure those
bolts using the Allen wrench (#G) to lock them in with the headboard (#4).
#C x 6 pcs
#D x 6 pcs
#E x 6 pcs
#A x 8 pcs
#D x 8 pcs
#E x 8 pcs
Turn right (clockwise) to tighten
Back Side
Back Side
#3
Back Side