I.
Carefully place the table top (#1) facing down on a protected surface. Align
the leg (#2) with the pre-drilled holes on the bottom of the table top (#1).
II.
Prepare two bolt assemblies by inserting FIRST the lock washer (#B) onto
the bolt (#C) and then the flat washer (#A) onto the SAME bolt (#C), in that
order.
III.
Insert the bolt assemblies through the two pre-drilled holes on the bottom of
the table top (#1) and secure those bolts using the Allen wrench (#D) to lock
them in with the leg (#2).
IV.
Repeat the process for the remaining 3 legs (#2).
Turn right (clockwise) to tighten
Page 4 of 6
Enlarged
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
ASSEMBLY IS COMPLETED
Carefully turn the completed table upright. Make sure the table is
rested on a flat surface and it does not feel loose or wobbly. If it
does, double check that the bolts are secured and properly tighten.
Содержание CM4320-3PK
Страница 2: ...Page 2 of 6...
