I. Place the backrest with legs on a protected surface.
II. Align the seat (#2) to the pre-drilled holes on the back
rest with legs (#1).
III. Prepare 2 bolt assemblies by FIRST inserting the lock
washer (#D) onto the bolt (#C) then the flat washer (#E)
onto that SAME bolt (#C), in that order. Secure using the
Allen wrench (#F).
I. Prepare 4 bolt assemblies by FIRST inserting the
lock washer (#D) onto the bolt (#A) then the flat
washer (#E) onto that SAME bolt (#A), in that order.
II. Insert into the pre-drilled holes located on the back
corners of the seat (#2) and secure using the Allen
wrench (#F).
