Page 6 of 6
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
With the help of another person,
carefully place the table top (#1)
facing down on a protected surface.
II.
Align the assembled table base (#3)
with the pre-drilled holes on the
bottom of the table top (#1)
III.
Prepare 8 bolt assemblies by
inserting FIRST the lock washer (#B)
onto the bolt (#C) and then the flat
washer (#A) onto the SAME bolt
(#C), in that order.
IV.
Insert the bolt assemblies through
the pre-drilled holes of the table
bases (#3) and secure those bolts
using the Allen wrench (#D) to lock
them with the table top (#1).
V.
Carefully turn the completed table
upright. Make sure the table is
rested on a flat surface and does not
feel loose or wobbly. If it does,
double check that the bolts/screws
are secured and properly tightened.
I.
To insert the table leaf or leaves (#2) unlock the latches located
under the table top (#1).
II.
Once unlocked, slide outward on both ends of the outer-piece
table until there is sufficient opening to place the table leaf or
leaves (#2). Then slide inward on both ends of the outer-piece
table until they are touching and sitting flush with the table leaf or
leaves (#2).
III.
Secure the parts together by locking the latches located under
the table top (#1).
ASSEMBLY IS COMPLETED
Содержание CM3557T
Страница 3: ...Page 3 of 6 ...
