Page 5 of 6
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
Insert the two threaded studs (#G) into the legs (#4).
II.
Insert the leg support (#5) onto the threaded studs (#G) of the legs
(#4). Then insert the beveled washer (#H), the flat washer (#A)
and the lock washer (#B), in that order onto the threaded stud
(#G).
III.
Secure the hex nut (#E) onto the threaded stud (#G) using the
wrench (#F) to tighten. Repeat the process to secure the other
side of the leg support (#5) onto the other threaded stud (#G).
#A x 2 pcs
#B x 2 pcs
#E x 2 pcs
#G x 2 pcs
#H x 2 pcs
I.
Align the table base (#3) with the
pre-drilled holes on the leg (#4).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer (#B)
onto the bolt (#C) and then the flat
washer (#A) onto the SAME bolt
(#C), in that order.
III.
Insert the bolt assemblies through
the pre-drilled holes on the table
base (#3) and secure those bolts
using the Allen wrench (#D) to lock
them with the leg (#4).
IV.
Repeat the process above to
assemble the second table base (#3)
onto the second leg (#4)
Содержание CM3557T
Страница 3: ...Page 3 of 6 ...
