I.
Place the backrest with legs (#2)
on a protected surface. Align
the seat (#3) with the pre-drilled
holes of the backrest with legs
(#2).
II.
Prepare 2 bolt assemblies by
inserting FIRST the lock washer
(#D) onto the bolt (#A) and then
the flat washer (#E) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assemblies
through the pre-drilled holes near
the center of the seat (#2) and
secure those bolts using the
Allen wrench (#F) to lock them
with the backrest with legs (#2).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
#A x 2 pcs
#D x 2 pcs
#E x 2 pcs
I.
Place the seat (#3) facing down on
a protected surface. Align the two
front legs (#1) with the pre-drilled
holes on the corners of the seat
(#3).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#D) onto the bolt (#B) and then the
flat washer (#E) onto the SAME bolt
(#B), in that order.
III.
Insert the bolt assemblies through
the corner holes of the seat (#3) and
secure those bolts using the Allen
wrench (#F) to lock them with the
front legs (#1).
#3
Содержание CM3149SC-2PK
Страница 3: ...Page 3 of 6...
