Furniture of America Atwood CM4401C, Руководство по сборке

Страница: 5 / 6

Insert stand A (#2) through stand B (#3). Make
sure the cutouts are aligned with each other.
Turn right (clockwise) to tighten
Page 5 of 6
#B x 14 pcs
#D x 14 pcs
#E x 14 pcs
#G x 1 pc
#H x 2 pcs
#I x 1 pc
I. Insert the flat bracket (#I) through the cutout on the stand A (#2) and align with the pre-drilled
holes on the stand B (#3).
II. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#B) and then
the flat washer (#E) onto the SAME bolt (#B), in that order.
III. Insert the bolt assemblies through the holes on the flat bracket (#I) and secure those bolts using
the Allen wrench (#F) to lock them with the stand B (#3).
IV. Align the corner bracket (#G) with the pre-drilled holes on the stand A (#2) and the stand B (#3).
V. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#B) and then
the flat washer (#E) onto the SAME bolt (#B), in that order.
VI. Insert the bolt assemblies through the holes on the corner brackets (#2) and secure those bolts
using the Allen wrench (#F) to lock them with the stand A (#2) and the stand B (#3).
VII. Align the long sides of the two base brackets (#H) with the pre-drilled holes on the stand A (#2)
and the stand B (#3).
VIII. Prepare 6 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#B) and then
the flat washer (#E) onto the SAME bolt (#B), in that order.
IX. Insert the bolt assemblies through the holes on the base brackets (#H) and secure those bolts
using the Allen wrench (#F) to lock them with the stand A (#2) and the stand B (#3).
#2
#3