Set frame assembly upside down on floor and then place legs
inside of frame aligning the second hole of the frame with the front
of the foot.
1 | SECURE LEGS TO FRAME
Note: Be sure welded brackets are facing back of workstation
Note: Longer side of bracket should face front of workstation
2 | CONNECT SURFACE BRACKETS
Slide bracket under frame, align pre-drilled holes of surface
bracket to main frame and secure with 4 screws each.
Fr
on
t
Ba
ck
3.1 | SET WORKSTATION LENGTH
Measure from outer edges of workstation legs to determine proper
workstation length. Use the chart below to determine the length of
workstation frame.
Note: See
3.2 chart
if working with option #2 surface configuration.
Surface
Width
Frame
Length (#)
48"
47.5"
54"
54"
60"
60"
66"
66"
72"
66"
#"
S
PRO
U
T
PRO
S
PRO
U
T
PRO
The return surface and main surface will be along the main frame.
The frame will be centered along the combined surface width.
3.2 | ALTERNATIVE CONFIGURATION OPTION
Combined Surface Width
Frame Length (#)
Surface
Width
Frame
Length (#)
66"
66"
72"
78"
S
ID
E
-
B
Y
-S
ID
E
L
-S
H
A
P
E
S
ID
E
-
B
Y
-S
ID
E
L
-S
H
A
P
E
12
13