Furmanac POWER OTTOMAN, Руководство по сборке

Страница: 7 / 12

HEAD END
SI
D
E R
AIL
SID
E R
AIL
FOOT END
MOTOR
MOTOR
LEFT HAND SIDE
MOTOR
RIGHT HAND SIDE
MOTOR
9
. Connect the electric cables before placing the base boards into your bed.
A
.
Connect the the two leads that
link the motors on each of the side
rails. Make sure your cable run along
the side rail and are clear of the
hinge bracket
B
. Connect the cable to the switch
controller.
C
. Connect the transformer
to the bed.
1 0
. Insert the 2 x 9v batteries supplied into the
transformer. The batteries provide an emergency
back-up allowing you to lower the bed base in
the event of a power cut.
The batteries are NOT to be used as an alternative
to the mains power supply. The batteries will
provide enough power for 1 or 2 lifts, and should
be removed and replaced when they have been
used.
DC Power
IMPORTANT
THE TRANSFORMER MUST
BE PLACED OUTSIDE OF THE
BEDFRAME
PLEASE NOTE
THIS CABLE IS TACKED
UNDERNEATH THE SIDE RAIL
AND IS COLOURED BLACK
DC Power
1 1
. Remove the childlock advisory sticker.
Turn off the Child Lock by
repeating this step.
To activate Child
Lock; press
small button with
pointed object
(e.g Nib of a
Ballpoint Pen)
Once activated
the Green Light
will turn off.
7
*Optional extension cable to be attached if needed.