• Remove the sliding caps off each end of the motor.
• Clip the motor in place as shown in
image B
.
• Once the motor is in place as shown in
image C,
re-fit the
sliding caps back onto the motor
.
• Connect the
9v Battery
and slide back into it’s
safety compartment.
• Pulling the second to last slat to one side
on the Foot End, slide the retaining bar
into position as shown in Image C.
• Plug in your new bed to a nearby socket
• Make sure that the cables are clear of
the “K” frames and
do not get trapped
when the bed is in use.
• Clip the remote onto the side of your
new bed.
9. Fixing the Motor
10. Fixing the Mattress retainer bar.
11. Connect your New Bed.
A
A
CC
BB
D
D
CC
BB
A
A
Please Note:
this step will require
two people to complete.
Guide
for the Spirit Upgrade Features Bed electrics
Connect
your remote to the bed
U
SB
C
ONTROL
B
OX
MOTOR UNIT
PRESS TOP TWO
BUTTONS ON
REMOTE TO PAIR
CONNECT THE
CONTROLLER
CONNECT THE 9V
BATTERY
This is an important
back up power
source.
UPGRADE
SPIRIT
BED
CONNECT POWER
TO YOUR BED
This is a male ended
connector and
connects into the
motor directly.
POWER
HE 150
CONTROL BOX
LIGHT
USB UNIT
USB UNIT
HEAD END
MASSAGE
UNIT
FOOT END
MASSAGE
UNIT
PRESS BUTTON
TO ACTIVATE
PLUG INTO
SOCKET AND
POWER ON
12. Attach the
motor
to the bed.
Identify the head and foot sides of
the motor by the images on each end
of the motor.
• Ensure your motor is the correct
way up, please use the highlighted
icons as your guide.
• Slide the caps off each side
of the motor.
• Place the motor on to the cross
bars until you hear it “click” into
position.
• Slide the caps back on to the
motor.
• Connect the Battery
(this is a safety back-up)
HEAD
FOOT
Slide off covers
Click onto bar
Connect battery
Plug controler to
socket on motor
MOTOR-OKIN-88802 ON SURFACE
MOTOR-OKIN-92391 ON SPIRIT
Connect USB power
unit plug
12. Attach the
motor
to the bed.
Identify the head and foot sides of
the motor by the images on each end
of the motor.
• Ensure your motor is the correct
way up, please use the highlighted
icons as your guide.
• Slide the caps off each side
of the motor.
• Place the motor on to the cross
bars until you hear it “click” into
position.
• Slide the caps back on to the
motor.
• Connect the Battery
(this is a safety back-up)
HEAD
FOOT
Slide off covers
Click onto bar
Connect battery
Plug controler to
socket on motor
MOTOR-OKIN-88802 ON SURFACE
MOTOR-OKIN-92391 ON SPIRIT
Connect USB power
unit plug