1. Unpack the bed, making sure that
the packaging is out of your assembly
area. You will have two bed sections,
the
head end
and the
foot end.
Some stages of this Bed
Assembly will require two people
to hold and lift components that
maybe heavy.
The following tools are required for this assembly
1 x Scissors
(to remove cable ties)
1 x Cross Screwdriver
(also known as a Phillips)
pLEASE NOTE
Tools required
Introduction
and components
2. Once unpacked you should have
one bag of components. Remove the
cable ties that secure this bag and
remove the contents so that they are
ready for the next stages.
CONTENTS
OF THE BAG:
• 8 x Headboard Fixing Washers
• 4 x Headboard Fixing Bolts
• 2 x Black Serrated Spacers
• 8 x M8 Pozi Screws (for legs)
• 2 x 10” Skittle Legs
• 1 x Remote (Different for each model)
• 4 x Chrome Stiletto Legs
ATTACHED
TO FRAME
1 x Motor Unit
Attached by cable ties for
transportation and needs
to be removed and made
ready for a later stage.
HEAD END
FOOT END
FIXING-M8HBWASHER = X8
FIXING-M8HBBOLTS = X4
WASHER-SERRATED-50 = X2
FIXING-POZIPAN-M8X30 = X8
MSKT10INCH = X2
LEG-STILETTO-150X70
-CHROME = X2
SURFACE USES:
• 1 x Remote (OKIN 82417)
• 7 Button Remote
PLEASE NOTE:
If you have chosen to have Upgraded Features
on your Spirit Bed Additional Instuctions on the
Remote Handset and a different Electrics Layout
is shown on Page 12&13
SPIRIT USES:
• 1 x Remote (OKIN 82418)
• 11 Button Remote
MOTOR-OKIN
82417 = X1
MOTOR-OKIN
82418 = X1
