Furious FPV STEALTH RACE VTX V3, Руководство пользователя

Страница: 16 / 19

15
Betaflight Configurator Settings
First of all, make sure that Smart Port is setup properly:
1. In Betaflight Configurator, Ports tab, find the UART where you have connected
S.PORT to, then select Smart Port at “ Telemetry Output” column
2. Enable option TELEMETRY in Configuration tab
Extra Steps for VTX setup

Go to Ports tab, find the UART4 you connected FC to the VTX and choose IRC
TRAMP [Auto] in “Peripherals” tab.

With Fortini OSD FC, I am using Serial RX in UART3 , IRC Tramp for Stealth Race
VTX V3 in UART4 and SmartPort in UART TX6 .
*Note: Don’t forget to Click “ Save and Reboot ” when you finish.
Setting up LUA script on telemetry page
Adding the script as a telemetry page will enable access at the press of a button.
(For now, this only applies to the Taranis X9D series)
1. Hit the [MENU] button and select the model for which you would like to enable
the script
2. While on the [MODEL SELECTION] screen, long-press the [PAGE] button to
navigate to the [DISPLAY] page
3. Use the [-] button to move the cursor down to [Screen 1] and hit [ENT]
4. Use the [+] or [-] buttons to select the [Script] option and press [ENT]
5. Press [-] to move the cursor to the script selection field and hit [ENT]
6. Select “ bf ” and hit [ENT]