Furious FPV STEALTH RACE VTX V3, Руководство пользователя

Страница: 14 / 19

13

Option 3: Configure by Transmitter Taranis
You can now adjust rates and VTX settings right from your Taranis menu with
Betaflight using LUA script and Smart Port. In this tutorial, we are going to show you
how. Furious FPV uses this article is written by Artur Banach, Oscar and editted by
Furious FPV. This guide is written specifically for Betaflight firmware - Fortini F4 OSD.
Hardware Requirement
-
Taranis X9D or QX7 TX
-
Furious FPV SPD15 or XSR RX ( Smart Port required )
-
Fortini F4 OSD Flight Controller with Betaflight FW, found out if Smart Port is
supported natively
-
Stealth Race VTX – to change VTX settings from Taranis transmitter
Hardware Connection

To allow VTX configure from Taranis, simply connect S.PORT from SPD15 or XSR
RX to UART TX6 pin on the Fortini F4 OSD

For changing VTX settings, Telemetry port from Stealth Race VTX V3 also needs
to be connected to one of the UART TX4

Please connect as the below picture: