Furious FPV INNOVA OSD-VTX, Руководство пользователя, Страница: 6 / 7

NOTE: Betaflight labels serial port starting from 0 not 1 yet most flight controller label UART’s starting
with 1. So when selecting your serial port you will typically take whatever the UART number is and
subtract 1 to get the serial port it’s asking for.
EX: you have your Innova VTX-OSD connected UART1 that you want to connect to you will need to type:
serialpassthrough 0 11500
Step 4: Power up the device you are trying to connect to if it’s not already
You will see what looks like random characters start scrolling under the command you ran if it’s working
properly.
NOW YOU CAN CONFIGURATION OSD VIA FC
Step 5: Disconnect and close cleanflight but leave all the connections as they are.
Step 6: Open up your software you use to configure it. In my case it was MwOSD GUI.
Step 7: Select the port you noted in Betaflight being used to connect to your flight controller and
connect.
Step 8: You should have read/write access now to the device.
Step 9: When you’re done all you need to do is reset the flight controller via reset button or unplugging
USB and battery. This will remove the serialpassthrough so you can once again access it via Betaflight.