FUNKY MONKEY BARS Floating Accessories Bar Скачать руководство пользователя страница 4

LOAD RATING

Page 3

QUALITY & INDEPENDENT TESTING

At Funky Monkey Bars® we take the quality of our designs and safety very seriously. All Funky Monkey Bars® frames 

go through a stringent, independent structural testing process prior to being made available for release to our 

customers.

Our frames are designed within the parameters of the Australian Standard for Playground Equipment AS4685.1:2014.

The structural integrity of our frames has been tested for performance through a combination of engineering 

calculations and physical testing.  The tests have been performed by independent, certified structural engineers in 

accordance with Australian Standard for Playground Equipment AS4685.1:2014 and European Standards 

EN1176-1:2008.

The independent testing conducted on The Floating Flying Fox certified the frame to a load rating of 130kgs or 1 

user.

 

- The maximum number of users for the Floating Flying Fox is noted as 1 user.

WITNESSED BY:

MODEL

APPROVED BY:

69.5

1

USER LOAD

(KG)

 LOAD TESTING CERTIFICATION

NUMBER

OF USERS

DATE :

COMMENTS:

DATE OF TEST

LOAD RATING

(KG)

130

DATE :

I hereby confirm all testing was undertaken in accordance with Physical Testing of Structural Integrity

requirements of AS 4685.1: 2014 App C / EN 1176-1:2008° except where noted below;

 

Floating Accessories Bar

May 2018

May 2018

May 2018

Funky Monkey Bars®

Independent Engineer

Содержание Floating Accessories Bar



















Отзывы: