FUNKY MONKEY BARS Floating Accessories Bar, Руководство по сборке

Страница: 11 / 18

1. Space swing hooks (not included) if applicable along accessories tube
as determined by your additional purchased components.
NOTE:
The number of swing hooks may vary according to the individual components
you are adding to the accessories bar. Swing hooks are supplied with accessories.
Refer to individual components for maximum load on accessories bar.
2. Slide swivel braces onto accessories tube.
3. Slide long short tees onto assembled legs
from step 6. Insert the accessories tube into the
long short tees and make sure the tube is butted up
100% to the extension tube as per detail below.
4. After hearing the clunk sound firmly tighten grub
screws on long short tees. Leave swivel brace
loose for later adjustment.
7
ASSEMBLE FLOATING ACCESSORIES FRAME
Page 10
Leave swivel brace loose.
Firmly tighten all extra long tee grub screws.
+ 360
o
2x Swivel Brace D173
2x Long Short Tee D101L
1x Accessories Tube
(Dia 50 x 2950mm)
Extension tube on
leg from step 6.
CLUNK
Accessories Tube
Extension Tube
Accessories Tube
Extension Tube
Swing Hooks if applicable
Not included.
(number and spacing will vary
with accessory)