manualshive.com logo in svg

Funkwerk P/N 800ATC-A-(201)-(301), Эксплуатация и установка

Поделиться
Скачать
Funkwerk P/N 800ATC-A-(201)-(301) Скачать руководство пользователя страница 29

TRT800A / P/N 800ATC-A-(201)-(301)  

Operation and Installation 

 

 
 

29

Document-No: 03.2112.010.71e / Revision: 1.02

entering the FID into the transponder the last remaining digits must be 
filled with blanks. 

 

The ICAO Flight Plan only specifies 7 characters for FID. 
Funkwerk Avionics reserves 8 characters as stated in ED-
73B for further expansion of the flight plan. 
The user shall only program 7 characters for FID. 

4.1.5 Option 

Ground-Switch 

If a ground switch is connected (and declared in the configuration!), the 
transponder is able to acknowledge on-ground and in-flight state. In on-
ground state, stand-by mode is activated. 
With a connected ground switch (see section 3.6.1.2) the transponder 
automatically changes into Standby mode once the gear touched the 
ground. For this the Setup must be configured accordingly. For a detailed 
description of the Setup progress, please refer to 4.2.1 Setup Steps. 

4.1.6 

Reply Information - Speed Category (RI) 

Besides AA, AC and FID another important part of the Mode-S data is 
the Speed Category of the respective aircraft. This speed category shall 
be configured in the setup (see 4.2.1) and must contain one of the 
following codes. 

Code  Description 

08 

No maximum airspeed data available. 

09 Maximum 

airspeed 

≤

 75 kt 

10 

75 kt > maximum airspeed 

≤

 150 kt 

11 

150 kt > maximum airspeed 

≤

 300 kt 

12 

300 kt > maximum airspeed 

≤

 600 kt  

13 

600 kt > maximum airspeed 

≤

 1200 kt 

14 

Maximum airspeed > 1200 kt 

15 Not 

assigned 

4.1.7 

Serial Interface (RS232) 

With the additionally available address adaptor TRT800EMSS the 
RS232 interface can be connected to a GPS receiver, to support the 
ADS-B Out functionality (Broadcasting of own position which could be 

Содержание P/N 800ATC-A-(201)-(301)









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды