Funkwerk D4 Office, Руководство по эксплуатации, Страница: 96 / 222

96
Putting into operation D4 Office
Putting into operation
Operation modes of the D4 Office
The D4 Office provides the following operation modes
„
Operation without MEM Card
„ All settings and all log-in information for the operation of a handset
D4 Office with a system-compatible telecommunications system (PABX)
– like an Integral 55 or a GAP system – will be stored in the memory of
the handset.
„ The handset D4 Office may successively be logged in to several sys-
tem-compatible telecommunications systems. For example, it may be
logged in to telecommunications systems at different locations of a
plant. From now on, the user of the D4 Office can select one of the sys-
tems to which his handset has been logged in according to his needs.
At a time, the D4 Office can only be used
with one of the telecommuni-
cations systems .
„ Operation with a MEM Card from a handset type D3 or FC1
„ In this operation mode the D4 Office is equipped with a MEM card from
a DECT™ handset D3 or FC1, which already has been logged in to a
telecommunications system in the past.
„ The D4 Office will use the log-in information that is stored on the MEM
card. Furthermore the D4 Office will copy the telephone-book entries
from the MEM card into its own memory.
„
The D4 Office will never write back any information from its own me-
mory into the D3 or FC1 MEM card.
„ During operation with a MEM Card from a handset type D3 or FC1, the
D4 Office cannot be logged in to further system-compatible telecommu-
nications systems. See page 100.
„ All registrations of a D4 Office into telecommunications systems which
have been carried out in the past without any MEM card (see operation
mode without a MEM card) neither are visible nor accessible during
operation with a MEM Card from a handset type D3 or FC1. These
registrations are available after having removed the D3 or FC1 MEM
card from the D4 Office again.