Parameter setting via WEB interface
Information page
G
eneral information regarding firmware versions and status reports
Illustration 5: Information page
On the left hand side are links to different setup and info pages.
•
Information
the page above(Illustration )
•
APs
Shows a table with all access points currently seen by the WI-Client (Illustration ).
•
Wireless
WLAN interface setup (SSID, mode, frequencies etc.) (Illustration )
•
Security
Encryption setup (WPA, WEP) (Illustration )
•
Admin - reboot WI-Client
- reset all parameters to default.
- firmware updates
- configure IP-address, subnet mask, gateway IP
- configure setup options
- enter username and password
(Illustration )
•
serial Port 1
setup of serial port 1 ()
•
serial Port 2
setup of serial port 2
WI-Client Manual Version 2.16 V3
8
