Funkwerk bintec WI-Client Скачать руководство пользователя страница 21

Legal Notice

Aim and purpose

This document is part of the user manual for the installation and configuration of funkwerk devices. For
the latest information and notes on the current software release, please also read our release notes,
particularly if you are updating your software to a higher release version. You will find the latest release
notes under 

www.funkwerk-ec.com 

.

Liability

This manual has been put together with the greatest possible care. However, the information contained
in this manual is not a guarantee of the properties of your product. Funkwerk Enterprise Communications
GmbH is only liable within the terms of its conditions of sale and supply and accepts no liability
for technical inaccuracies and/or omissions.
The information in this manual can be changed without notice. You will find additional information and
also release notes for funkwerk devices under 

www.funkwerk-ec.com 

.

Funkwerk devices make WAN connections as a possible function of the system configuration. You
must monitor the product in order to avoid unwanted charges. Funkwerk Enterprise Communications
GmbH accepts no responsibility for data loss, unwanted connection costs and damage caused by
unintended
operation of the product.

Trademarks

funkwerk trademarks and the funkwerk logo, bintec trademarks and the bintec logo, artem trademarks
and the artem logo, elmeg trademarks and the elmeg logo are registered trademarks of Funkwerk Enterprise
Communications GmbH.
Company and product names mentioned are usually trademarks of the companies or manufacturers
concerned.

Copyright

All rights reserved. No part of this manual may be reproduced or further processed in any way without
the written consent of Funkwerk Enterprise Communications GmbH. The documentation may not be
processed and, in particular, translated without the consent of Funkwerk Enterprise Communications
GmbH.

You will find information on guidelines and standards in the declarations of conformity under

www.funkwerk-ec.com 

.

How to reach Funkwerk Enterprise Communications GmbH

Funkwerk Enterprise Communications GmbH, Südwestpark 94, D-90449 Nuremberg, Germany,
Phone: +49 180 300 9191 0, Fax: +49 180 300 9193 0

Funkwerk Enterprise Communications France S.A.S., 6/8 Avenue de la Grande Lande, F-33174
Gradignan, France, Phone: +33 5 57 35 63 00, Fax: +33 5 56 89 14 05

Internet: 

www.funkwerk-ec.com

WI-Client Manual Version 2.16 V3

21

Содержание bintec WI-Client






















Отзывы: