FunkTronic Major 6a, Руководство пользователя

Страница: 5 / 49

m6a-eng (18.12.2009)
- 4 -
Kompetent für Elektroniksysteme
m6a-eng (18.12.2009)
- 5 -
Kompetent für Elektroniksysteme
TX LED
For each of the four channels there also is a separate TX LED , which lights up when the
corresponding transmitter is activated. The transmitter is activated by pushing a PTT button while
talking or transmitting a call.
Flashing of the TX LED means that another Major 6a is already using this channel (PTTT output
on LOW < 3V).
Loudspeaker LED / Call detection LED
The loudspeaker LED (channel 1..4) lights up when the loudspeaker of the corresponding
channel is activated on operating volume.
A flashing loudspeaker LED means that a call has been detected (call detection LED). The call
detection LED disappears when the corresponding channel is actively used for transmitting, or
when the channel is activated (register 001/2).
F-Buttons (channel buttons) LED
The function of the F-buttons LEDs is programmed in register 001 at the 1st digit.
The LEDs (LEDs in the selection buttons) flash when there is at least one identified call saved in
the identification memory of the corresponding channel. The corresponding LED disappears only
after all identifications have been deleted in the corresponding identification memory.
Also see section Identification Memory - (register 001/1 = 2).
The LED is turned on if the corresponding channel is activated - (register 001/1 = 1)
The LEDs are always turned off - (register 001/1 = 0)
Ex factory programming of the buttons
This specification is valid for the ex factory programming of the buttons.
As all buttons can be programmed freely the functions of the buttons of individually programmed
Major 6a can differ from this description.
Button Function short Function long
F1...F4 channel 1...4 on/off volume control channel 1...4
0...9 call signal button 0... none
S1...S3 none none
S4 last channels on/off adjust headset volume
*
call signal button A channel selection
# displaying the next identification deleting of the current identification
PTT transmitting with gooseneck micro none
CALL transmit selected call as 5-tone transmit return call as 5-tone sequence
sequence
Z select short dial and transmit as none
5-tone sequence
Loudspeaker turn off loudspeaker adjust total volume