background image

Page 30   

 

 

 

 

 

 

        XO1 Operators Manual 

AES / EBU Sub-Menu   

 

 

 

 

 

 

 

 
Connection of AES/EBU signals is via the existing rear panel XLR connectors.  
With the AES/EBU option fitted, AES Receive and Diagnostic modes are provided.

  

 

Routing Options

Selects the input source – either analogue or digital, and similarly the output source, 
again either analogue or digital. 
 

AES Diagnostics

Reports validity flag, clock speed and errors present in the incoming AES digital signal. 
 

AES / EBU Connections

The AES/EBU digital signal is a stereo data stream, and so only one input XLR and 
three output XLRs are used for the digital interface. 
 
The connections are as follows: 

 

 
Input A - 

Analogue Input at all times 

Input B - 

Switchable between digital (stereo) input and analogue input 

 
Output 1 - 

Switchable between digital out (for channels 1 & 2) and analogue out 1 

Output 2 - 

Switchable between digital out (for channels 3 & 4) and analogue out 2 

Output 3 - 

Switchable between digital out (for channels 5 & 6) and analogue out 3 

 
Output 4 -  

Analogue output 4 only 

Output 5 -  

Analogue output 5 only 

Output 6 -  

Analogue output 6 only 

Содержание XO-1











































Отзывы: