XO1 Operators Manual
Page 1
XO1 Quick Reference
Accessing channels: Use channel’s SELECT button.
First press accesses that channel’s gain.
Second press accesses last viewed parameter.
Third press will drop back to the default screen.
To scroll through a channel’s parameters, use the
BACK
and
NEXT
keys.
Accessing menus:
Press the
MENU
key, then the
BACK
and
NEXT
keys to find the sub-menu
required, and select using the
ENTER
key. This
applies to all levels of menu;
ENTER
always confirms
selections.
The Menus and their Contents
Input Setup Sub-menu:
Used for ganging input gain
and base delays.
X-over Sub-menu:
Used for storage and recall of
crossovers, including format, output EQ, output delay,
output gain, and limiter settings. Also used for design
of new crossovers.
Security Sub-menu:
Used for locking various
features of the units, using a four digit code.
System Sub-menu:
Used to view the units status,
and select various global options such as parametric
EQ ‘Q’ or bandwidth units, and output meter
monitoring point (pre or post mute).
Notes
The crossover and output settings are stored and
recalled independently (using store/recall a X-Over)
from the input settings (using store/recall input
memory).
The output meters show level, in dB, from the limiter
threshold. The input meters show level, in dB, from
input clip.
The high and low-pass filters are defined independently
on each channel.
To access the limiter attack and release parameters,
select “Auto Limiter TC: No” when designing a
crossover.
To swap parametric filter units between bandwidth
(‘BW’) and ‘Q’, enter the ‘System sub-menu, select
‘Filter Q or BW’, and select required readout units.
Содержание XO-1
Страница 1: ...XO 1 Users Manual ...
Страница 17: ...Page 16 XO1 Operators Manual Screen Layouts Overview ...
