FUNKEN FRV 125 Скачать руководство пользователя страница 12

13

7.7 Malfunctions

Deviations from normal operating statuses of the fan can 
indicate possible malfunctions and must be checked immedi-
ately by the service team.

CAUTION!

Long-term malfunctions can damage the fan and also cause 
personal injury.

 Before rectifying malfunctions, switch off the 
power supply to the fan and secure it against reac-
tivation.

7.8 Explanation of symbols

Warning. Dangerous 
electrical voltage!

Warning. Explosive 
atmosphere!

Warning. Corrosive 
substances!

Warning. Danger of 
hand injury!

Warning. Danger of 
trapping!

Wear 
gloves!

Warning!

This combination of symbol and keyword indicates 

a possibly dangerous situation that may lead to death or 
serious injury if not avoided.

8 COPYRIGHT

The content and writings published in these operating and 
maintenance instructions are subject to German copyright 
law. Any form of reproduction, editing, distribution and any 
form of exploitation outside that permitted by copyright law 
requires the written consent of the respective creator or 
author. 

9 EMERGENCIES

In emergencies, switch off the main switch or disconnect the 
power plug.

Fire extinguishers of fire classes A, B, C and F must be used 
in case of fire. These fire extinguishers must only be used on 
low-voltage plants (up to 1,000 volts). 
Remain at a safe distance while extinguishing fires.

10 OPERATOR’S 
RESPONSIBILITIES

The operator of the fan procures and employs the materials/
media required for the proper operation of the fan. Correct 
handling of these materials/media and the involved dangers 
are the sole responsibility of the operator. The operator 
must provide hazard warnings and disposal instructions. The 
safety data sheets of material manufacturers and media 
manufacturers must be observed.

11 IDENTIFICATION PLATE

The identification plate is located on the identification plate 
panel or housing wall of the fan.

Содержание FRV 125


















Отзывы: