EVO EXPERT Manual
5/105
1.
Introduction
Thank you for acquiring the Evo Expert rotational viscometer model from Fungilab.
The Evo is a rotational viscometer, based on the measurement of the torque of a rotating spindle in
a sample at a specified velocity. Three different models, as well as various accessories, allow it to
cover a wide range of viscosity measurement.
2.
Safety Instructions
It is not the purpose of this manual to outline all of the safety instructions recommended
for the use of the rotational viscometer, its accessories and samples. It is the responsibility
of the user to establish health and safety practices and to determine the application’s limits
before use.
Fungilab guarantees the satisfactory operation of the viscometers and its accessories only if
there have not been any unauthorized adjustments to the mechanical pieces, the electronic
components and the software.
The operator should follow all of the warnings and instructions of this manual to ensure the
safe and proper operation of the equipment.
Do not use the equipment for any other purpose that is not described in this manual.
Do not use any accessory that is not supplied and approved by Fungilab.
Do not use the viscometer or its accessories if there is any suspicion of malfunction. Do not
use the equipment in situations or conditions that can provoke personal injuries or material
damage.
The rotational viscometer is
not
an inflammable, non-hazardous instrument and therefore should
not be used in areas where there is an explosion risk.
Before using the viscometer, carefully read and observe the following
precautions:
those who do not follow them may cause serious harm or
personal injuries.
To avoid an electric shock:
Do not use the rotational viscometer without a solid connection to the ground.
3.
Symbols used in this manual
The following symbols are used in this instruction manual:
This symbol warns us of an operational, practical, or similar
procedure that, if it is not carried out properly, may damage
the equipment.
