EVO EXPERT Manual
43/105
The custom speeds can be edited individually. The field of a custom speed can be highlighted by
using the ‘
’ and ‘
’ keys. Press the ‘ENTER’ key to edit the selected custom speed. The speed can
be modified, saved or deleted and the list of custom speeds will appear consequently updated.
Moreover, the ‘CLEAR’ option erases all the custom speeds and returns to the ‘Custom Speed’
submenu.
Once all the desired custom speeds are introduced, highlight the ‘SAVE’ option with ‘
’ and ‘
’ keys
and press ‘ENTER’. This save the custom speeds and return the instrument to the ‘Speed Settings’
menu.
NOTE:
The speeds that can be programmed in the personalized profile must
follow a positive progression, meaning that any value can be equal or greater
than the previous speed but never less.
The ‘MEM/CLEAR’ and ‘
◄
’ exit keys bring you to the previous screen, the ‘SPEED SETTING’
submenu. With the ‘MEM/CLEAR’ key, changes will not be saved.
8.5.3 Multistep
The MULTISTEP application is one of the multiple options offered in the Fungilab Evo EXPERT
viscometer-programming menu. This application allows you to increase the viscometer’s spindle
turn speed non-linearly at a determined time and at a progression that doesn’t have to be either
constant or positive.
This option can be accessed from the ‘PROGRAM’ menu, using the ‘
’ and ‘
’ keys to highlight the
‘MULTIESTEP’ field and then pressing the ‘ENTER’ key. The following configuration screen will be
shown:
For L models:
For R and H models:
