Functional Devices, Inc.
• p: 800.888.5538 • f: 765.883.7505 • www.functionaldevices.com • [email protected]
# Relays & Contact Type:
Expected Relay Life:
Operating Temperature:
Operate Time:
Green LED:
Green LED:
Yellow LED:
Pink LED:
Red LED:
Dimensions:
Wires:
Approvals:
Housing Rating:
Gold Flash:
Relay Override Switch:
Current Sensor Range:
Wifi:
One (1) SPDT Continuous Duty Coil
10 million cycles minimum mechanical
-30 to 140° F
18mS
Device Status
Wifi Ad-Hoc Status
Wifi Infrastructure Status
Digital Input Status
Relay Status
4.00˝ x 4.00˝ x 1.80˝ with .50˝ NPT Nipple
16˝, 600V Rated
UL Listed, UL916, C-UL
FCC, Wifi Certified ASD Device
UL Accepted for Use in Plenum, NEMA 1 No
DIP Switch Control
0.50 Amp - 20 Amps, in 0.25 Amp increments
IEEE 802.11 b/g/n Compatible
2 Mbps Data Rate
-91 dBm Min. Sensitivity
+102 Bm Max Output Power
Currently Unsecured Connection
(WPA-PSK or WPA-2-PSK Available)
Supports PING and ARP
DSSS Modulation
RIBTWXV-WI Series
Wifi IEEE 802.11 Network Enclosed I/O Device: One Discrete Output (20 Amp Relay SPDT +
Override), One Discrete Input (Dry Contact, Class 2); Analog and Digital Current and Relative
Power
*
Indication;
24 Vac/dc; 120 Vac, 208 Vac, 240 Vac, or 277 Vac Power
Class 2
Dry Contact
Digital Input
2 1
OPEN
DIP Switch
CLOSED
24 Vac
24 Vdc
Common
DIP Switch Relay Control
DIP Switch
**
Relay State
1 2
0 1
Auto
1 X Override ON
0 0 Override OFF
**
0 = Open ; 1 = Closed
J1 - Not Used
RESET to Factory
Defaults Pushbutton
(Activate with
insulated tool.)
Code
Version
3.1
Power Input:
24 Vac = Terminal Strip
24 Vdc = Terminal Strip (24 Vdc + 25% – 6%)
120 Vac = Wht/Blk Wire
208 Vac, 240 Vac, 277 Vac = Wht/Brn Wire
Neutral or Other Phase = Wht/Yel Wire
Device Settings by Network:
•
Power up default relay state
•
Host name and location labels
•
Relay bound to digital input
•
Current threshold for go/no-go status
•
Load voltage entry for power conversion
Device Settings:
•
Local Override
•
Reset to Network Defaults Pushbutton
Specifications
Network Compatible Relay / Current Sensor Combos
Notes:
•
This device is not intended for revenue
grade power measurement. However, in
addition to Wifi load control, this device is
useful for building audits or LEED programs
requiring relative readings to inexpensively
pinpoint high power usage equipment or
to identify energy waste due to equipment
maintenance requirements or
malfunction.
*
Power Input Ratings:
125 mA Max @ 24 Vac
88 mA Max @ 24 Vdc
120 mA Max @ 120 Vac (RIBTWXV2401B-WI)
120 mA Max @ 208 Vac (RIBTWXV24208B-WI)
120 mA Max @ 240 Vac (RIBTWXV24240B-WI)
120 mA Max @ 277 Vac (RIBTWXV24277B-WI)
Available TCP/IP Settings:
•
IP Address (Static)
•
Port Number
•
Subnet Mask
•
Gateway
•
Ad-Hoc mode
•
Infrastructure mode
•
Scan for wireless networks
Contact Ratings:
20 Amp Resistive @ 277 Vac
20 Amp Ballast @ 120/277 Vac (N/O)
10 Amp Ballast @ 120/277 Vac (N/C)
Not rated for Electronic Ballast
10 Amp Tungsten @ 120 Vac (N/O)
2 HP @ 277 Vac
1 HP @ 120 Vac
RIBTWXV-WI Series Selection Guide
Model#
24 Vac/dc
120 Vac
208 Vac
240 Vac
277 Vac
RIBTWXV2401B-WI
•
•
RIBTWXV24208B-WI
•
•
RIBTWXV24240B-WI
•
•
RIBTWXV24277B-WI
•
•
•
Setup Instructions available on website.
http://www.functionaldevices.com/pdf/bulletins/B1598_393186.pdf
Or scan QR code with your smart phone.
Wifi
Made in USA
Meets
“
Buy American
”
of ARRA 2009
RED LED = Relay Status
PINK LED = Digital Input Status
YELLOW LED = Wifi Infrastructure Status
GREEN LED = Wifi Ad-Hoc Status
GREEN LED =
Device Status LED
Wht/Yel Wht/Blk
or
Wht/Brn
Blu
N/C
Yel
COM
Org
N/O
Power
Sensing
